logo
 
Co ANh  EnglishViệt Nam Tiếng Việt
Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com MULTI-POINT INJECTION & ELECTRONIC IGNITION WITH OBD-II
Model DIAG- OBD-II-07





 
 
Product code: ET2008
● Origin: DTDAUTO
● Availability: In stock
● Rate:Đánh giá


(Only support for Windows operating system)
● OVERVIEW
 
- This is a product of DTDAuto Technology Team, Institute of Physics, Hanoi, Vietnam.
- Equipment is designed specially for vocational schools where trainees are taught both theory and practice of the electronic fuel injection system in OBD-II / CAN-compliant vehicles.
- Model DIAG-OBD-II-07 is modern perfect training equipment providing all basic elements in technique training such as: Listening, Watching and Acting with online simulation, tests, and professional fault diagnosis by using a computer.
- Construction of the system is built visually on the based of real parts of the system of multi-point fuel injection & electronic ignition in Toyota vehicles from 2005 up to now.
- Connect online to DTD-Code (a computer-software) to display current sensor parameters, read and clear faults with the standard OBD-II.
- Designed with the German standard of training equipment
 
● TECHNICAL FEATURES
 
- Language: English or Vietnamese
- Circuit diagram is printed on the board
- Simulate faults with PAN switches on the board
- The Intake-air system uses an Air-pump
- All systems work as if they did in real vehicles
- Connected to the computer by COM port or USB port
 
● BASIC CONSTRUCTION
 
- 01 ECU of 1NZ-FE engine (Made in Japan)
- 01 knock sensor (Made in Japan)  
- 01 Oxygen sensor (Made in Japan)
- 01 Coolant temperature sensor (Made in Japan)
- 01 Crankshaft position sensor (Made in Japan)
- 01 Camshaft position sensor (Made in Japan)
- 01 Throttle position sensor (Made in Japan)
- 01 Intake flow sensor (Made in Japan)
- 01 ISC valve (Made in Japan)  
- 01 OBD-II connector (Made in Japan)
- 01 Check Engine Light (Made in Japan)
- 01 Ignition key (Made in Japan)
- 04 Main injectors (Made in Japan)
- 04 Ignition plugs (Made in Japan)  
- 01 Fuel filter (Made in Japan)
- 01 Fuel pump (Made in Japan)
- 01 Pressure meter (Made in Japan)
- Some relays, lights, switches and 01 speed-adjuster (Made in Japan)  
- 01 computer & computer table (optional without quotation)
- 01 CDROM installation of software
- 01 OBD-II electronics signal converter (Made by DTDAuto)
- 01 12V Battery (optional without quotation)
- 01 Equipment board with mobile-wheels
- Documents
COMPONENTS
- 01 visual-model with real parts of the electronic fuel injection system of the generation vehicles
- 01 CDROM for software installation of Electronic fuel injection system (DTD Code)
- 01 computer and 01 computer-table (optional)
- Reference documents and textbooks
- 12V/50A Battery (optional)
- Accessories, cables
 

DTD Code Interface
 
 
OTHER SPECIFICATIONS
 
- Voltage used: 220VAC/50Hz and 12VDC/50A;
- Total weight: about 60 kg
- Dimensions: (1600H x 1800W x 550D) mm
- Using area: about 1m3
- This kind of product is indoor-equipment
● RELEVANT DOCUMENTS
 
Answer & Question Consultation selection Why buy DTDAUTO products?
Product introduction Product introduction